radar leveling system

Specifications

You can't beat these specifications!
The Waltz RLS Specifications Radomes
less than 18"
(mast or post mounts)
Radomes
less than 18"
(backstay mounts)
Radomes
greater than 18"
(mast or post mounts)
Radomes
greater than 18"
(backstay mounts)
Platform Weight 6 lbs. 6 lbs. 7 lbs. 7 lbs.
Height of swing Arm 16" 16" 16" 16"
Platform Dimensions 8"x8" 8"x8" 8"x8" 8"x8"
Backstay Tube Diameter N/A 1 ¼ N/A 1 ¼
Raytheon and Autohelm radar have unique platforms that are slightly larger.
Please specify the type of radar when ordering.
Backstay Base Plate and Tube
Backstay Base Plate and Tube
Backstay Radar Leveling System
The marine-grade stainless-steel tube attaches to the hull securing the base plate (2"x 4") to the transom or combing. The tube runs parallel to the backstay, and attaches to it by insulated connectors at the top of the tube. And, you can remove the tube and platform assembly while leaving your backstay in place.
  • If you want a backstay model, determine if you want it fore or aft of the backstay. You might make this decision based on whether you have room on the deck to mount the tube. If you mount the base plate horizontally, it is 2" fore and aft and 4" port and starboard. Or, you can mount the base plate vertically.

  • If you want a backstay model and you have less then 30" between the leech of your mainsail and the backstay, you need the aft facing radar leveling system. See models AA and AF.

  • If you want a backstay model and you have more than 30" between the leech of your mainsail and the backstay, you can order the forward facing radar leveling system. See models FA and FF.

  • If you have a split backstay, when ordering indicate whether you want the radar leveling system on the port or starboard side. Also, please include angle of the split from the vertical.



    The specification and depictions are given as general information and are not binding.  Waltz Manufacturing reserves the right at any time without prior notice to change, alter or modify products and prices and to discontinue any product in our sole discretion.

  • Home | Specifications | Products | About Us | Links | Contact | Site Map

    Waltz Manufacturing
    Osceola, IA 50213 | 641-344-0636 | leveler84118@gmail.com